Yenişehir, Ataşehir

The ablution room at Kağnıcı Yolu 29 has its own 30 milliamp device. The mosque lighting is separate. The booster, the lift and the shared lighting of the site beside it are on their own riser. They are not put on 29. If they are, the site load heats the mosque run. The 16 amp breaker is not upsized. If the flat dips for a moment while the site starts, the two intakes are written. If the tripping does not stop while the mosque is dark, the fault is not at the mosque. The site cover is not opened on a flat call. 8, 6, Şıh Hasan 2 and Yılmaz 14/1 are not this riser. The same 34779 does not make four neighbourhoods into one panel. The cover is not opened while it is live. The clamp writes two numbers, one while the site starts and one while the flat is idle.

Barajyolu Caddesi 2/2 is the muhtar's room. Its small panel is not tied to 29. If the tripping stops when the plug is pulled, the fault is that door. If it does not stop, the mosque circuit is read. Yenişehir in Pendik is not put in place of this door. The short run inside a dry room is NYM. A run that leaves the building is NYY. NYA is only inside a conduit. A Wago 221 is for copper only. If the run is aluminium, it does not enter the same hole as a copper screw. A neighbour's neutral and a water pipe are not bridged. The section and the breaker are read together. The flat's side is read without cutting the seal. If there is no voltage on the sealed side, that is written and left to the distribution company. Night and public holidays are a separate rate. The difference is said before leaving. The work stays in Istanbul.

On an evening fault the first breaker that comes down is the flat's. If Kağnıcı Yolu 29 stays lit while the flat is dark, the ablution room of Hz. Ömer is not tied to this meter. The booster and the lift of the site beside it are noted in the same look as the site riser. If the device keeps tripping while the mosque is dark, the turn comes to Barajyolu Caddesi 2/2. The plugs are pulled one by one. The name of the appliance and the socket are noted for the plug that stops the tripping. If no plug stops it, the junction box is opened after the power is off. A screwdriver does not enter while the cover is live. If a copper wire and an aluminium wire sit under the same screw, the screw comes out and the two metals go to separate terminals. A Wago 221 stays on copper wire only. The aluminium run stays in its own terminal. If the section is thin, the breaker is not upsized. A 2.5 square millimetre copper socket run is not taken above 16 amp. The ablution room has its own 30 milliamp residual device. If the test button does not trip, the device is changed. The site cover is not opened on a flat call. Dursunbey Caddesi 6, Şıh Hasan Caddesi 2 and Yılmaz Sokak 14/1 do not enter this order. Yenişehir in Pendik does not enter it either.

The second number is taken with the tap closed. No socket, device or run is changed before the two numbers stand side by side. If the number rises with the tap open and falls with the tap closed, the wet circuit is separate. If the light at 29 also goes dark while the flat's breaker is down, there is a shared riser, and that riser is not taken apart on a flat call. The small panel at 2/2 is not tied to the mosque lighting. The booster is not put on the mosque's 30 milliamp device. The night rate and the day rate are not the same. The difference is said before leaving. The work stays inside the Istanbul boundary. The meter seal is not cut. If there is no voltage on the sealed side, that is measured and left to the distribution company. The clamp jaw is insulated and it does not rest on a bare bar. The same 34779 does not move the Mevlana, Mimar Sinan and Yeni Çamlıca doors onto this meter.