Mimar Sinan, Ataşehir

The ablution room at Şıh Hasan Caddesi 2 has its own 30 milliamp device. The mosque lighting is separate. The bench, the compressor and the shared lighting in the Yedpa site are on their own riser. They are not put on the mosque breaker. If they are, the bench's load heats the thin circuit. The 16 amp breaker is not upsized to hide a bench. The workshop cover is not opened on a flat call. If the flat dips for a moment while the bench starts, the two intakes are written. If the tripping continues while the bench is idle, the fault is not at the workshop. The record that writes 34758 does not move number 2 into Atatürk Mahallesi. The door is in this neighbourhood and the code that is read is 34779. 8 and 17 in Mevlana, Yılmaz 14/1 in Yeni Çamlıca and Barajyolu 2/2 in Yenişehir are not this bench. The cover is not opened while it is live.

Sakarya Caddesi, Yedpa Bulvarı 156/1 is the muhtar's room. 1/5C in Barbaros is not put in place of this room. The park cover is not opened here. If the tripping stops when the plug is pulled, the fault is that door. If it does not stop, Şıh Hasan 2 is read. The short run inside a dry room is NYM. A run that leaves the building is NYY. NYA is only inside a conduit. A Wago 221 is for copper only. If the run is aluminium, it does not enter the same hole as a copper screw. A neighbour's neutral and a water pipe are not bridged. The section and the breaker are read together. The flat's side is read without cutting the seal. If there is no voltage on the sealed side, that is written and left to the distribution company. Night and public holidays are a separate rate. The difference is said before leaving. The work stays in Istanbul.

On an evening fault the first breaker that comes down is the flat's. If Şıh Hasan Caddesi 2 stays lit while the flat is dark, the ablution room of Yedpa Camii is not tied to this meter. The workshop bench and the compressor are noted in the same look as the site riser. If the device keeps tripping while the mosque is dark, the turn comes to Yedpa Bulvarı 156/1. The plugs are pulled one by one. The name of the appliance and the socket are noted for the plug that stops the tripping. If no plug stops it, the junction box is opened after the power is off. A screwdriver does not enter while the cover is live. If a copper wire and an aluminium wire sit under the same screw, the screw comes out and the two metals go to separate terminals. A Wago 221 stays on copper wire only. The aluminium run stays in its own terminal. If the section is thin, the breaker is not upsized. A 2.5 square millimetre copper socket run is not taken above 16 amp. The ablution room has its own 30 milliamp residual device. If the test button does not trip, the device is changed. The workshop cover is not opened on a flat call. 1/5C and the park in Barbaros do not enter this order. Aksekili Mehmet Uslu Caddesi 8 is in Mevlana.

The second number is taken with the tap closed. No socket, device or run is changed before the two numbers stand side by side. If the number rises with the tap open and falls with the tap closed, the wet circuit is separate. If the light at Şıh Hasan 2 also goes dark while the flat's breaker is down, there is a shared riser, and that riser is not taken apart on a flat call. The small panel at 156/1 is not tied to the mosque lighting. The bench is not put on the mosque's 30 milliamp device. Even if a record writes 34758 on the mosque, the street is Şıh Hasan 2 and the neighbourhood code is 34779. The night rate and the day rate are not the same. The difference is said before leaving. The work stays inside the Istanbul boundary. The meter seal is not cut. If there is no voltage on the sealed side, that is measured and left to the distribution company. The clamp jaw is insulated and it does not rest on a bare bar. Mimar Sinan in Çekmeköy and Mimar Sinan in Tuzla are not this meter's door.