November 2026 updated price and service guide

Districts

Büyükçekmece

5.0 / 5.0 on Google · 2 verified reviews
  • On-call from Pendik · European side by appointment · no minute promise
  • State-Certified Mastery Qualification · Invoiced With A 1 Year Guarantee
  • No Surprise Charges · Clear Price Approval Before Work
  • TSE & ISO referenced materials · Scan slots on the certificates page

An electrician in Büyükçekmece is not written as a night sprint. The district splits between the damp of the lake, the flat boards of the Mimaroba and Mimarsinan residences, and the outdoor sockets of the summer houses. Damp on the lake shore is not a salt film. On the Marmara shore toward Kumburgaz and Celaliye the outdoor socket also sees salt. The two are not put in the same fault sentence. A flat that goes dark in a residence is the job of that flat's device, not of the estate transformer. If the whole stair is dark and the meter is cold, the report belongs to BEDAŞ. The seal is not opened. In a summer house a socket with a broken cover beside the garden tap drops the house's single 30 mA unit. Distance does not open an invented night tariff on the phone. The call is written in the appointment book. The slot is said before setting off. A minute figure is not quoted. The labour band is written after measurement and is not inflated as kilometres.

  • Appointment, no minute promise
  • 24 Neighborhoods
  • 30 Services
ElektrikçiGO emergency electrician van, Istanbul 24/7
Service van
Adnan Şemiye, ElektrikçiGO electrician, fitting an Istanbul meter cabinet

Founding master

Adnan Şemiye18 years in the field

MYK-certified master

Adnan Şemiye reads this job in the field. The price is written before work starts.

From the field

ElektrikçiGO emergency electrician van, Istanbul 24/7Emergency van · ⁦+90 582 403 10 87⁩

The Mimaroba and Mimarsinan board and the outdoor socket by the lake

Büyükçekmece flat board, cover open, outdoor-socket breaker apart

Why a dark flat in a residence is mistaken for the riser

In Mimaroba and Mimarsinan the flat board comes after the residence riser. If one flat goes dark in the evening and the stair stays lit, the fault is not at the transformer. The caller still asks for the estate electrician and the distribution company in the same sentence. The flat door comes first: has the residual-current device tripped, has the main breaker dropped, or is the board warm. If the device has tripped, the circuits inside the flat are separated one by one. If the bathroom heater, the built-in cooker and the balcony socket sit behind the same 30 mA unit, whichever one is wet drops the whole flat. The sound way is put back. The wet way is read with a 500 V megohmmeter. Under one megaohm it is not connected behind the new device. The device is not bridged. The clamp writes how many amperes each way drew. A 1.5 mm² conductor is not taken above 16 amperes. If the section is short the cable changes. While the neighbouring flat is lit, this flat's riser screw is still checked, because a loose neutral flares the lamp and the caller takes that for a burnt socket. Phase-to-neutral, phase-to-earth and neutral-to-earth are written on the same paper.

If the whole block is dark and the meter is cold, this is not the flat board's job. The report belongs to BEDAŞ. We do not open the seal. The residence board's lock is opened with the manager, because that board is common property. If a common booster pump or the car-park lighting was tied onto a flat's device, the tie is undone. A common load is not left behind one flat's 30 mA unit. If it is left, a wet car park at night also darkens the child's room upstairs. A Schneider or Siemens enclosure is preferred where a residence board's cover will not close. The preference is not a brand conversation. If the cover does not close, lake damp reaches the bar within a winter. The work inside the flat is to separate the way before the brand of the cover. The fault in Mimaroba and the fault in Mimarsinan are not written as the same estate template. Which block, which floor, which way, how many amperes, is a separate line on the paper.

Lake damp, the summer-house outdoor socket and salt on the Marmara shore

In a summer house by the lake the outdoor socket is often under the tap. Hose water enters a socket whose cover is broken. The water that enters is not salt, and it still trips the 30 mA device. Mosquitoes and leaves collect in the box and the terminal blackens. This is not the green bar of a Bosphorus waterfront house, and it is not the salt film of an island pier. The mechanism is water. The circuit is made dead, the socket comes off, the wet tail is cut, and a gasketed outdoor socket goes on. The outdoor socket is not left on the same device as the indoor circuits. It goes onto its own 30 mA Type A unit. The hose then does not drop the fridge. NYM is not buried at the foot of the garden wall. The outdoor run is NYY. A joint is not left taped in the water. If it must be buried, it is a resin joint. The indoor NYA tail is not extended outdoors. If the lake house has an earth rod, the resistance is written. 'The rod is there' is not said before that. A water pipe is not made into an earth.

Toward Kumburgaz and Celaliye the same outdoor socket also sees salt. The fault in the lake house is water and leaves. The fault on the Marmara shore is water and salt. The terminal turns green and the cover powder is white. If a gasketed socket is not enough, the gland changes too. A salty run is not written on the same spare-parts list as the lake house run. The list is split at the appointment. If a summer house stayed closed through winter, the device can trip on the first try at opening. That is not stretched into a copy of the closed-house routine of another shore. Here the socket under the tap and the joint box on the lake side are hunted first. The wet outdoor run is separated before the whole house goes onto the megohmmeter. If the house then holds, the remaining job is the outdoor run. If it does not hold, the indoor ways are read one by one. The two readings are not mixed. If they are mixed, a sound fridge circuit is renewed as well and the outdoor socket stays wet.

Distance, the appointment and the band after measurement

A burnt socket beside a new Legrand switch and earthed outlet

Why a night sprint is not written in the book

Büyükçekmece is not the call of an inner-city side street. The lake shore, Mimaroba and the Marmara side are not held as three addresses to be run one after another on the same evening. The call is written in the appointment book. The slot is said before setting off. What is said is not a minute. There is no night sprint. An arrival that crosses the city and comes back the same night is not invented. A burning smell or a shock is moved forward in the book. Moving it forward is not quoting a time that cannot be held on the road. On the phone, if the house can be made dead, that is asked. The board cover is not touched with a wet hand. The hose is taken off the outdoor socket and the plug comes out. That precaution takes the place of a sprint. Before setting off, the technician says the difference in parts between a lake house and Kumburgaz. A gasketed outdoor socket, a gland for a green terminal, or only a clamp and a device in a residence. An unsaid part is not grown into a survey at the door.

The summer-house owner arrives at the weekend and leaves on Monday with the board cover open. An open cover brings lake damp down onto the bar. The appointment is set on the phone before the cover is closed. While it is set, the question is which socket sits under the tap. If that is not asked, the technician hunts a leak that is not in the indoor board along the indoor circuits. On a residence call the question is different: one flat, or the whole block, and is the meter cold. A whole block and a cold meter are a BEDAŞ sentence. One flat is our sentence. The two sentences are not joined in the same sprint. If they are joined, the distribution company's job is written onto the flat device, and the flat's leak is written onto the residence board. The paper stops that mix. The paper does not carry a minute figure.

The 2026 band that is not inflated as kilometres

Distance does not add a night surcharge on top of the labour band. The 2026 range is labour excluding materials, and on site it moves after measurement. Fault finding is 750-1,500 TL, a breaker or residual-current device 1,250-3,200 TL, a socket or light 650-2,800 TL, an air-conditioning circuit 2,400-5,500 TL, a flat board 6,500-16,000 TL. The NYY metre of the outdoor socket is not buried inside that range. The metre is measured in the garden and the figure is written before work starts. A gasketed socket sits in the socket band. A separate 30 mA Type A sits in the device band. A change of enclosure on the residence board sits in the board band. The survey fee comes off the job if the repair is accepted. The binding figure is on the paper after measurement and before work. Workmanship is guaranteed for one year. That year does not contain a clause that shortens the lake road. A minute figure is not inside the price.

The lake house and the residence flat share the same band and do not share the same job. The band being the same is not a reason to write the socket under the tap onto the residence riser. On the paper the address, the fault and the band are separate lines. If the address is Mimaroba, the line is the flat device and whether the neighbouring flat is lit. If the address is a lake summer house, the line is the outdoor socket, the NYY and the rod resistance. If the address is Kumburgaz, salt is added to the line. The three lines do not become one invoice in a night sprint. The invoice is cut after measurement. Material is not removed before it is cut. A wet socket that was removed is not called finished just because it was swapped for a new gasketed socket without a reading. The finished job is the job written as the device holding and the outdoor run separate. An unwritten job comes back the next weekend with the same hose.

Frequently asked

Frequently asked

Where is the look when one flat goes dark in Mimaroba?

If the stair is lit, the look is at the flat device, not at the estate transformer. The circuits are separated one by one. If the bathroom heater, the cooker and the balcony socket are on the same 30 mA unit, the wet one drops the whole flat. The wet way is read with a 500 V megohmmeter. The device is not bridged. If the whole block is dark and the meter is cold, the report belongs to BEDAŞ. The seal is not opened.

Why does an outdoor socket by the lake leak?

The socket is often under the tap. Hose water enters through a broken cover. Even without salt, the water trips the 30 mA device. The circuit is made dead, the wet tail is cut, and a gasketed outdoor socket goes on. The outdoor run goes onto its own 30 mA Type A unit and is pulled in NYY. NYM is not buried. This is not the same as the salty socket on the Marmara shore. At Kumburgaz salt also works on the terminal.

Why is a night sprint to Büyükçekmece not written?

The district is written in the appointment book. The slot is said before setting off. There is no night sprint and no minute figure. The lake, the residence and the Marmara shore are not held as three addresses to run one after another the same evening. A burning smell is moved forward in the book. Moving it forward is not quoting a time. On the phone the hose comes off and the board is not touched with a wet hand.

Who does the Büyükçekmece meter belong to?

The sealed meter is a BEDAŞ report. We do not open the seal. If the whole block is dark and the meter is cold, the company is called. If one flat is dark and the stair is lit, the device and the sockets after the meter are our measurement. The residence common board is opened with the manager. A common booster is not left tied to one flat's device.

Is the 2026 Büyükçekmece electrician price written by distance?

No. Distance does not open a night surcharge. The band is labour excluding materials. Finding a fault is 750-1,500 TL, a device or breaker 1,250-3,200 TL, a socket 650-2,800 TL, an air-conditioning circuit 2,400-5,500 TL, a board 6,500-16,000 TL. The NYY metre is not buried inside the band. It is measured in the garden. The firm figure is written after measurement. Workmanship is one year. A minute is not inside that figure.

How is a night or Sunday call planned in Büyükçekmece?

Büyükçekmece on the European side is worked by appointment. A burning smell, arcing or a shock is moved ahead the same day; no minute is promised, because a time that cannot be held in bridge traffic helps nobody. A night or holiday difference is stated on the phone before departure.

Services

PLC programmingindustrial electrical serviceShort circuithome–plant electrical serviceSocket and switchhome electrical serviceResidual-current devicehome electrical serviceEarthinghome–plant electrical serviceCable and circuit runhome electrical serviceRewiringhome electrical serviceTelevision mountingelectrical fitting serviceAC Electrical Wiringresidential–commercial AC serviceIntercom & Doorbell Systemsresidential intercom serviceFuse & Panel Faultsconsumer unit & panel serviceChandelier Mounting & Lightingresidential lighting serviceInternet & Data Cablingresidential & office network serviceElectrical Fault Repair24/7 emergency fault serviceDistribution Board Setupresidential–commercial panel serviceEarthing & Lightning Protectionbuilding earthing & surge serviceSecurity Camera Systemssurveillance & CCTV serviceEV Charger InstallationEV charging infrastructure serviceSmart Home Automationsmart home & KNX/Zigbee serviceHalf The House Has No Powerpartial outage & phase loss repairBurning Smell and Crackling Socketsemergency thermal inspection & arc repairVoltage Fluctuation, Regulators and UPSvoltage protection & uninterruptible powerGenerator and ATS Paneltransfer panelMeter, Main Switch and Risercustomer side after the meterLift and Hydrophore Panelpanel supplySolar Inverter Board Connectioncustomer-side AC outputPanel faultLighting installationBreaker replacementSecurity camera

What Can You See At Home? Fast Diagnosis By Symptom

There is a burning smell from a socket

Single socket being checked for burn marks

A loose screw connection has carbonised the terminal. Take that outlet out of service at once; the point is found with a thermal camera without opening the wall.

Diagnosis sits in the 750–1,500 TL band. The job line is written from the 2026 table after measurement.

Fix and price

The breaker keeps tripping

Main switch and breaker row

Branches are separated one by one at the board and the device reset; if it holds the fault is in the wiring, if not it is the device. The faulty leg is confirmed with a megohmmeter.

Diagnosis sits in the 750–1,500 TL band. The job line is written from the 2026 table after measurement.

Fix and price

The flat has lost power

Meter measuring voltage

If the building is dark, the record belongs to 186. If only the flat is dark, the fault is after the meter: one phase is missing or the neutral has broken. On neutral loss one phase climbs above 250 volts and another falls to 180.

Diagnosis sits in the 750–1,500 TL band. The job line is written from the 2026 table after measurement.

Fix and price

The breaker trips when the AC or oven starts

Breaker dedicated to an appliance circuit

Inrush exceeds the existing circuit. The fix is not a bigger breaker but a dedicated run from the board with a motor characteristic device.

Diagnosis sits in the 750–1,500 TL band. The job line is written from the 2026 table after measurement.

Fix and price

A chandelier needs fitting

Chandelier on the ceiling

The chandelier is fixed to the existing box and a load-rated hook. If the hook is not anchored in the slab, it is not hung. Live, neutral and earth are confirmed separately; the body is never put on phase.

Diagnosis sits in the 750–1,500 TL band. The job line is written from the 2026 table after measurement.

Fix and price

I get a shock from the sink or washing machine

Washing machine socket connection

There is no protective earth and the neutral is bridged to the earth terminal in the socket. This is a lethal risk; stop using the appliance immediately.

Diagnosis sits in the 750–1,500 TL band. The job line is written from the 2026 table after measurement.

Fix and price

How Our Field Team Works A Call

On Büyükçekmece call-outs the team follows the sequence below. No arrival minute is promised. The technician's name is given on the phone before anyone sets off.

  1. 01
    Symptom
    The residual current device trips again the instant it is reset
    Measurement
    Branches are separated one by one at the board and each leg measured with a 500 V megohmmeter. Insulation resistance below 1 Megaohm shows that run's insulation is no longer doing its job.
    Intervention
    The faulty leg is isolated and the refrigerator, boiler and lighting restored within the first ten minutes. If damp is the cause the junction box is dried and encapsulated in dielectric gel; if the insulation is charred the run is renewed back to the board.
  2. 02
    Symptom
    A burning smell from a socket with a deformed face plate
    Measurement
    A FLIR thermal sweep is taken under load; where a loose screw connection has carbonised the terminal, that point reads between 160 and 200 degrees and is found without opening the wall.
    Intervention
    Blackened conductor ends are cut back to clean copper, the back-box replaced and the joint closed with a Wago 221 lever terminal. Every screw connection is tightened with a calibrated screwdriver to between 2.5 and 3.5 Nm.
  3. 03
    Symptom
    Half the flat has no power while the other half works
    Measurement
    Voltage is read phase by phase downstream of the meter. On neutral loss one phase measures above 250 volts and another around 180; that pattern burns appliance boards the same night.
    Intervention
    The main neutral terminals are opened, oxidised surfaces cleaned with dielectric solvent and torqued to specification. An over/undervoltage protection relay is added so appliances survive the next neutral loss.

2026 Electrician Prices and Recently Completed Jobs

The bands below are the labour ranges actually seen on recent call-outs and exclude materials. The binding figure is given in writing after on-site measurement, and no work starts without approval.

2026 Electrician Prices and Recently Completed Jobs
JobTypical price rangeWhat is included
Fault diagnosis and measured survey750 TRY – 1,500 TRYDiagnosis with a True-RMS clamp, megohmmeter and thermal camera; the survey fee is deducted if the repair is accepted.
Breaker / RCD replacement1,250 TRY – 3,200 TRYA 30 mA Type A device; varies with the number of ways and whether Schneider or Siemens is specified.
Dedicated air conditioning circuit2,400 TRY – 5,500 TRY3x2.5 or 3x4 mm² solid copper with a C20-C25 breaker; varies with run length and trunking route.
Flat board renewal (modular DIN)6,500 TRY – 16,000 TRYVaries with room count, circuit splitting and whether a surge arrester is included.
Chandelier, spot and socket installation650 TRY – 2,800 TRYPriced per unit; heavy chandeliers include a steel anchor set into structural concrete.
Internet and Cat6 data cabling1,100 TRY – 4,200 TRYIncludes a Cat6 run per room, an RJ45 data outlet and verification with a cable tester.
Factory / power factor periodic maintenance4,500 TRY – 18,000 TRYBy panel and step count; includes a thermal sweep and a written measurement report.

Prices are estimated labour ranges and exclude materials. A binding quote is issued in writing after the technician measures on site and before any work begins. Last updated: October 2026.

A Free Five-Point Board Safety Check On Every Call-Out

Whatever we are called out for, before leaving we measure your board at five points and leave the result in writing. It is the cheapest way to see a developing fault before it stops anything.

01

All breaker and terminal temperatures under load with a FLIR thermal imager; every point above seventy degrees is recorded.

02

The 30 mA residual current device trip time measured in milliseconds with a dedicated tester.

03

Voltage between neutral and earth; more than a few volts indicates a loose neutral or a bootleg ground.

04

Earth resistance read with a digital earth tester and assessed against the 2 Ohm target.

05

Breaker ratings against conductor size; anything above a C16 on a 1.5 mm² run leaves the cable unprotected.

Fully stocked mobile vans: every vehicle carries Schneider and Siemens breakers, 30 mA Type A devices, surge arresters, solid copper cable drums and junction box sets, so most jobs finish on the same visit.

Services We Provide In This Area

Neighborhoods

Service covers the neighborhoods of Istanbul's 39 districts. Not the whole of Turkey. A survey is not a binding quote.

Show neighborhoods

Google Review

Happy With The Work? Leave Us 5★ On Google

Your review is how neighbours searching for an emergency electrician in your area find us. One tap opens the Google review page; there is no account to create and no form to fill in.

Current rating: 5.0 / 5.0 · 2 verified reviews

Leave 5★ On Google
QR code opening the ElektrikçiGO Google review page
Scan with your phone after the job