Distribution and control
Schneider Electric
I see Schneider in a lot of panels. I do not put Acti9 and MasterPact in the same sentence. One is a flat breaker. The other is a plant main.
Each family has its own page
- Acti9 ve Easy9Miniature breakers, residual-current devices and comb busbars. Easy9 is a plain flat panel. Acti9 is the project panel. I do not upsize a breaker that keeps tripping. I isolate the circuit and measure insulation.Open the page
- Compact NSXMoulded-case breakers from 16 to 630 amperes, for sub-panels and machine feeds. A thermal-magnetic trip and an electronic trip are not the same fault. I read the cause off the trip unit.Open the page
- MasterPactThe air circuit breaker of the main distribution, from hundreds of amperes up to 6300. I do not close that job as a fuse change. The trip log, busbar temperature and selectivity are the work.Open the page
- TeSys ve GVTeSys K is the small coil, TeSys D the standard contactor, Giga the large motor. GV2 and GV3 are motor breakers and can replace a thermal overload. A burnt coil, welded contacts and a loose tail are different faults. I measure the coil voltage and change the body.Open the page
- Zelio, Harmony, Altivar, ModiconZelio is the timer and phase relay. Harmony is the 22 mm button and lamp. Altivar is the drive, Modicon the PLC. I write a drive code down once. No restart on a short-circuit code. On a PLC I measure 24 volts first and I do not wipe the program.Open the page
- Spacial ve ThalassaSpacial is the sheet-steel enclosure. Thalassa is the outdoor plastic box. The IP rating is on the label. A crushed gasket is not a breaker replacement.Open the page
Questions
Is a Compact NSX 160 A fault an intercom job?
No. It is a sub-distribution breaker. The call is written as an industrial panel.
Are Acti9 and Easy9 the same breaker?
They do the same job. They are not the same panel standard. I read the label.
Is this page that company's catalog?
No. I describe the families I meet on site. The order code is read off the label. The price is written after measurement.