Automation and drives
Omron
At Omron the relay, the PLC, the sensor and the drive are not the same box. MY is the glass relay. CP is the PLC. E2E is the sensor.
Each family has its own page
- MY ve LYMY2N is two contacts, MY4N four. The socket is separate. If the relay does not pull in I look at coil voltage. I do not blame the PLC.Open the page
- CP1E, CP2E ve SysmacCP is the small and middle machine. Sysmac is the heavy line. If the input LED is dark, cable and sensor come first.Open the page
- E2E ve E3ZE2E is the proximity sensor, E3Z the photocell. I do not mix three-wire and two-wire. If the supply is right I look at distance and target.Open the page
- SürücüJ1000 and V1000 are the small and middle drives. If the code is phase or overcurrent there is no start before the motor cable is measured.Open the page
Questions
Is this page that company's catalog?
No. I describe the families I meet on site. The order code is read off the label. The price is written after measurement.