Automation and drives
Delta
I see a lot of Delta in Turkey. MS300 and C2000 are drives, DVP the PLC, DOP the screen, DTK the temperature controller. When someone says 'a Delta inverter' I ask which one.
Each family has its own page
- MS300 ve C2000MS300 is the general machine drive. C2000 wants heavy torque. On an OCF-type current code the motor cable and winding are measured. The reset is not repeated.Open the page
- DVPThe DVP-14SS2 is the PLC I often see on small machines. The AS series is the newer family. When 24 volts sags, the inputs go dark together.Open the page
- DOP-100Screens such as the DOP-107 are the operator panel. If the cable is open, the alarm on the screen is not in the PLC.Open the page
- DTK ve DTATemperature controllers. If the sensor type is wrong the display lies. On ovens and packing machines I measure the probe. I do not blindly raise the setpoint.Open the page
Questions
Is a Delta inverter fault a socket job?
No. A drive code is an industrial call. It is not booked as a home socket.
Is this page that company's catalog?
No. I describe the families I meet on site. The order code is read off the label. The price is written after measurement.